Owner's manual

5
If the cleaner is left unattended remove the key
from the main power switch.
Do not leave the cleaner unattended
particularly if children are present. Do not
use or install the cleaner in places where
flammable gases or liquids are present. Do not
use flammable liquids or chemicals with this
cleaner. Ensure that the instruction manual and
warnings are always to hand and are legible.
Replace any torn or missing pages.
This machine must only be used on flat and
level surfaces.
DO NOT USE IT ON INCLINED SURFACES
without the assistance of the appropriate
personnel.
Do not operate the machine in bare feet, with
sandals or any kind of open footwear.
Do not wet electrical components with water or
any other liquid. Dry the machine with a cloth.
Powr-Flite is not responsible for the disposal or
production of products necessary for its
operation; e.g. batteries, detergents, etc.; the
customer himself must, therefore, arrange
for the disposal of substances harmful to the
environment in accordance with the laws of the
country in which it is used.
The same precautions should be taken when
the machine is scrapped.
The machine generates a sound pressure level
(noise) in an industrial environment (warehouse/
shop floor) which is less than 80 dBA and is
therefore absolutely harmless for the operator.
However, in other surroundings, this level may
be exceeded in which case the customer must
provide appropriate protection (ear defenders)
as well as notices to promote their use and
periodic hearing examinations.
The operator must not wear clothing with wide
sleeves, laces or belts; he must not approach
the machine with bare or wet feet; he must not
pull out the plug by pulling the cable; must not
smoke if the environment or products used do
not allow it.
For lifting and transporting use only specialized
personnel (slingers, crane operators, etc..) with
proper lifting gear which is suitable for the
weight of the various components.
- Transport (especially by road) must be carried
out with in the correct way and with the equate
means so as to protect the components
(especially the electronic ones) from violent
shocks, humidity, vibration, etc..; the machines
are supplied with wheels and therefore need
to be securely anchored before beginning
transportation.