OPERATOR’S MANUAL & PARTS LIST Comfort Pro FREEDOM Backpack Vacuum CPF6 Series WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT.
NOTES Model Number:___________________________________________________________________________ Serial Number:___________________________________________________________________________ Date of Purchase:________________________________________________________________________ Retain this manual as a permanent record of your purchase.
Introduction Check the carton for shipping damage. Carefully unpack and inspect your new Powr-Flite vacuum for shipping damage. Each unit is tested and thoroughly inspected prior to shipping. If damage is discovered, immediately notify the transportation company that delivered your machine and request an inspection. As a manufacturer, we are unable to act upon any claim for concealed damage; you must originate the claim.
IMPORTANT SAFETY INSTRUCTIONS Save These Instructions Safety Warnings WARNING! and Precautions Read all instructions before using. Save these instructions. Following the cleaning instructions will prolong the life of your Powr-Flite vacuum. When using an electrical appliance, basic precautions should always be followed. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. Use only as instructed in this manual. Use only the recommended attachments and replacement parts.
2. Disconnect the battery pack from the machine before making any adjustments, changing accessories or storing machine. 3. DO NOT expose battery packs to temperatures above 122°F (50°C). Never leave battery packs in automobiles on hot days, where temperatures can be much higher than the outside temperature. 4. DO NOT use or store vacuum or batteries in wet or moist conditions, or with flammable or combustible materials. 5.
Charger Grounding Instructions THE COMFORT PRO FREEDOM BATTERY CHARGER MUST BE GROUNDED. If the charger should malfunction or stop working, grounding provides a path of least resistance for electrical current, thereby reducing the risk of electrical shock. This unit is equipped with a cord that has an equipment-grounding conductor and grounding plug. The plug must be inserted in an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Operating instructions IMPORTANT! PERFORM PROPER INSTALLATION OF HEPA BAGS AND CORD IN COMFORT PRO BACKPACK VACUUMS. Please read the following instructions carefully. They will help to get the best performance from this professional commercial vacuum cleaner and to maintain it in optimum condition. Always make sure the main power of the vacuum is off and the unit is not plugged in when doing any maintenance on the vacuum. PREPARING TO VACUUM 1. Remove vacuum hose from top of unit. (Fig. 1) 2.
WARNING! Always unplug machine before cleaning, or making any adjustments or repairs. The backpack vacuum has four levels of filtration: the paper vacuum bag, a micro cloth filter, a pre-motor filter and an exhaust filter. These bags and filters capture fine dust particles and protect the motor from dirt. It is important to replace the paper bag when it is no more than ½ full and to clean the filters on a regular schedule and replace as necessary. A. Paper Vacuum Bag 1. Remove paper bag.
Wearing the Backpack Vacuum The backpack is designed to balance the weight of the vacuum on the hips, not the shoulders. 1. Adjust the VariQuick height adjuster to your back length. 2. Loosen all of the straps and place the vacuum on your back. Stabilizer Straps Shoulder Straps VariQuick Height Adjuster Sternum Strap Hip Belt FIG. 1 FIG. 2 FIG. 3 FIG. 4 3. Place the hip belt over your hip and connect the buckle. Your hip bones should be centered between the top and bottom of the belt.
Troubleshooting TROUBLESHOOTING 1. If the vacuum will not operate, check the following: a. The battery pack connection to the vacuum. b. The battery pack is charged. c. That the switch is in the “on” position and functioning properly. 2. If the battery pack is not charging, check that the charger is plugged into 120 Volt outlet and that the battery is properly connected to the charger. Also check fuse in charger. 3.
Specifications Specifications and parts are subject to change without notice. Please refer to www.Powr-Flite.com for the latest schematic drawing and parts list. PRODUCT SPECIFICATIONS MODEL ITEM# TOOL KIT* BODY DIMENSIONS (L X W X H) MACHINE WEIGHT (LBS. / KG) HARNESS WEIGHT (LBS. / KG) BATTERY WEIGHT (LBS.
Tool Kits Standard Tool Kit J1006 4′ Rigid Hose W/90° Bend & Cuff Fits: CPF6S CT171 2 Bend Wand CT176 17″ Crevice Tool W/Clip CT184 3″ Dusting Tool W/Clip B352-PF10 Carpet Tool W/Clip Install the floor tool to the end of the wand. Align the brass ring with the groove on the floor tool to ensure a secure fit.
Tools Schematics and Parts List 11 13 12 3A 8A 10 13 12 PREMIUM TOOL KIT - FITS CPF6P STANDARD TOOL KIT - FITS CPF6S ITEM DESCRIPTION PART NO. OTY ITEM PART NO.
1 48 47 49 36 52 2 46 51 50 3 53 45 43 4 5 39 6 7 55 40 41 44 42 54 8 36 34 33 9 34 36 10 19 18 21b 16 13 21a 37 33 35 20 17 15 14 38 11 32 31 30 29 27 28 12 6 26 25 24 23 22 14
No. Part No. Qty Description 41 1575 4 Washer 1 X9658 1 Deuter Backpack Harness 42 X9754 2 Screw 1/4-20 X 5/8” 2 A352-9401 4 Shoulder Rivet Female 43 X9691 2 Clip Nut 3 X1241 2 Belt Clip W/ Retainer 44 X9668 1 Inlet Filter Base 4 A352-9402 4 Shoulder Rivet Male 45 X9683 1 Inlet Filter 5 PX87 1 Rocker Switch 46 X9679A 1 Microcloth Bag With Gasket 6 X9690 7 Screw 8-18 x 1/2” 47 X9739 1 HEPA Paper Bag (10 Pk.
Powr-Flite Warranty Statement All Powr-Flite equipment has been tested and inspected at the factory and is guaranteed to be free from defects in material and workmanship for the duration described below. For full details, contact your authorized Powr-Flite Distributor, Service Center, or the Powr-Flite Technical Service Department.
