Product Manual

5
TROUBLESHOOTING
The following simple checks may be performed by the operator
Problem Reason Remedy
Machine not working, motors not running. Lack of voltage/electrical supply. Check supply cord, plug and socket outlet.
Vacuum motor not running, switch illuminated. Faulty motor. Contact service.
Brush motor running, but brush not rotating.
Brush shaft incorrectly positioned.
Loose or broken drive belt.
Refit shaft.
Replace drive belt
Cleaning solution not flowing.
Solution hose not correctly fitted to tank
connector.
Hose blocked.
Waterways in spray bar blocked.
Solution tank empty.
Blocked filter in solution tank.
Pump Thermal overload has tripped
Damaged pump.
Check connection is secure.
Check and clear hose.
Check and clean spray bar.
Refill tank.
Clean filter
Wait 20-30 minutes to allow thermal overload
to reset
Contact service.
Vacuum motor running but squeegee not
picking up.
Hose from squeegee blocked or split.
Squeegee slot blocked or blades damaged.
Vacuum dome out of position.
Check and clear hose.
Check and clean squeegee.
Reposition dome.
Contact service.
Brush motor not running. Circuit breaker tripped. Reset circuit breaker