OPERATOR’S MANUAL COMPACT AUTOMATIC SCRUBBER Model CAS16 WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT. ©Tacony, Inc.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE *When using an electrical scrubber, basic precautions should be followed. *Read all instructions before using your scrubber. IMPORTANT SAFETY ADVICE PREPARING FOR USE When using electrical equipment basic safety precautions should be followed including the following: Before connecting the machine to the power supply, check that the supply voltage corresponds with that marked on the rating label on the rear of the machine.
tank. CONTROLS The operating controls are located on the handle. Brush motor switch Used to switch motor ON and OFF. Lights when in the ON position. Neon indicator Lights when the machine is connected to the power supply Vacuum motor switch Used to switch motor ON and OFF. Provides suction at the squeegee. Lights when in the ON position. Vacuum motor switch Neon indicator Brush motor switch Solution feed triggers Supplies cleaning solution to the brush head when squeezed.
MAINTENANCE CHANGING THE BRUSH WARNING – This has been designed for use with the brushes specified by the manufacturer. The fitting of other brushes may affect its safety. Always ensure machine is unplugged before fitting or removing parts. 1. To change the brush, first remove both the recovery and solution tanks. 2. Move handle to upright position, pull backwards and downwards to rest on the floor with the base raised. 3. Push end of brush shaft with a finger and withdraw shaft completely. 4.
TROUBLESHOOTING The following simple checks may be performed by the operator Problem Reason Remedy Machine not working, motors not running. Lack of voltage/electrical supply. Check supply cord, plug and socket outlet. Vacuum motor not running, switch illuminated. Faulty motor. Contact service. Brush motor running, but brush not rotating. Brush shaft incorrectly positioned. Loose or broken drive belt. Refit shaft. Replace drive belt Check connection is secure. Cleaning solution not flowing.
For warranty information go to www.Powr-Flite.com A Tacony Company 3101 Wichita Court • Fort Worth, TX 76140-1755 1-800-880-2913 • Fax: 1-817-551-0719 • www.Powr-Flite.
