OPERATOR’S MANUAL & PARTS LIST Comfort Pro Backpack Vacuum BP6 - BP10 Series 6 quart model 10 quart model Hands free tool kit WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT. ©Tacony, Inc.
NOTES Model Number:_ __________________________________________________________________ Serial Number:____________________________________________________________________ Date of Purchase:_ ________________________________________________________________ Retain this manual as a permanent record of your purchase.
Introduction Check the carton for shipping damage. Carefully unpack and inspect your new Powr-Flite vacuum for shipping damage. Each unit is tested and thoroughly inspected prior to shipping. If damage is discovered, immediately notify the transportation company that delivered your machine and request an inspection. As a manufacturer, we are unable to act upon any claim for concealed damage; you must originate the claim.
Safety Warnings and Precautions Read all instructions before using. Save These Instructions. WARNING! Following the cleaning instructions will prolong the life of your Powr-Flite vacuum. When using an electrical appliance, basic precautions should always be followed. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. Use only as instructed in this manual. Use only the recommended attachments and replacement parts.
Grounding Instructions This vacuum must be grounded! Grounding is a safety measure to reduce the risk of electrical shock to the operator should the machine malfunction or stop working. Grounding provides the path of least resistance for electric current and will trip the circuit breaker, stopping the flow of electricity. This unit is equipped with a cord that has an equipment-grounding conductor and grounding plug.
oPeratIng InStructIonS IMPORTANT! PERFORM PROPER INSTALLATION OF HEPA BAGS AND CORD IN COMFORT PRO BACKPACK VACUUMS. Please read the following instructions carefully. They will help to get the best performance from this professional commercial vacuum cleaner and to maintain it in optimum condition. Always make sure the main power of the vacuum is off and the unit is not plugged in when doing any maintenance on the vacuum. Preparing To Vacuum 1. Remove vacuum hose from top of unit. (Fig. 1) 2.
unplug machine before cleaning, or making any WARNING! Always adjustments or repairs. The backpack vacuum has four levels of filtration: the paper vacuum bag, a micro cloth filter, a pre-motor filter and an exhaust filter. These bags and filters capture fine dust particles and protect the motor from dirt. It is important to replace the paper bag when it is no more than ½ full and to clean the filters on a regular schedule and replace as necessary. A. Paper Vacuum Bag 1. Remove paper bag.
Wearing the Backpack Vacuum The backpack is designed to balance the weight of the vacuum on the hips, not the shoulders. 1. Adjust the Vari-Quick height adjuster to your back length. 2. Loosen all of the straps and place the vacuum on your back. Stabilizer Straps Shoulder Straps VariQuick Height Adjuster Sternum Strap Hip Belt FIG. 1 FIG. 2 FIG. 3 FIG. 4 3. Place the hip belt over your hip and connect the buckle. Your hip bones should be centered between the top and bottom of the belt.
Active Cooling (Premium Model) To turn Active Cooling on, raise silver metal bar. (Fig. 5) Warm air will be pulled into machine and circulate cooler air through mesh on Deuter harness. Active Cooling can be turned off by lowering silver metal bar. (Fig. 6) Active Cooling can stay open all the time. OPEN FIG. 5 CLOSED FIG. 6 Powr-Flite.
Maintenance Routine maintenance can significantly increase the life of your backpack vacuum. The applications and amount of use varies, so the recommendations listed below are for average-to-high volume use. Constant operation may require additional maintenance. Before Each Use 1. Inspect power cord for fraying, cuts or damage; do not use if damaged. 2. Verify that paper vacuum bag is installed. 3. Place the hip belt over your hip and connect the buckle.
Specifications 6 quart model 10 quart model Specifications and parts are subject to change without notice. Please refer to www.Powr-Flite.com for the latest schematic drawing and parts list. PRODUCT SPECIFICATIONS MODEL ITEM# TOOL KIT* BODY DIMENSIONS (L X W X H) MACHINE WEIGHT (LBS. / KG) HARNESS WEIGHT (LBS.
Tool Kits Standard Tool Kit J1006 4′ Rigid Hose W/90° Bend & Cuff Fits: BP6S - BP10S CT171 2 Bend Wand CT176 17″ Crevice Tool W/Clip CT184 3″ Dusting Tool W/Clip B352-PF10 Carpet Tool W/Clip CT188 5″ Upholstery Tool W/Clip C352-PF20 Hard Floor Tool W/Clip Tools Item# TK57 Premium Tool Kit Fits: BP6P - BP10P Install the floor tool to the end of the wand. Align the brass ring with the groove on the floor tool to ensure a secure fit.
Tools Schematics and Parts List PREMIUM TOOL KIT - FITS BP6P - BP10P STANDARD TOOL KIT - FITS BP6S - BP10S ITEM DESCRIPTION PART NO. OTY ITEM DESCRIPTION PART NO.
Schematic 14 and Parts List - BP6S
Parts List - BP6S ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 DESCRIPTION 3.2 ALUMINUM DOMED RIVET #6 FLAT WASHER ZP BOTTOM HARNESS BOLT HARNESS MOUNTING WASHER LID LATCH FEMALE RIVET FOR BELT PANEL BELT PANEL MOUNTING SCREW THERMAL RESET SWITCH 5.
Schematic 16 and Parts List - BP6P
Parts List - BP6P ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 DESCRIPTION 3.2 ALUMINUM DOMED RIVET #6 FLAT WASHER ZP BOTTOM HARNESS BOLT HARNESS MOUNTING WASHER LID LATCH FEMALE RIVET FOR BELT PANEL BELT PANEL MOUNTING SCREW THERMAL RESET SWITCH 5.
Schematic 18 and Parts List - BP10S
Parts List - BP10S ITEM PART # QTY 1 3.2 ALUMINUM DOMED RIVET DESCRIPTION X9758 4 2 #6 FLAT WASHER ZP 1575 4 3 BOTTOM HARNESS BOLT 3361 2 4 HARNESS MOUNTING WASHER 7CR004 2 5 LID LATCH A352-3300 2 6 FEMALE RIVET FOR BELT PANEL A352-9401 4 7 BELT PANEL MOUNTING SCREW A352-9402 4 8 THERMAL RESET SWITCH B333-0400B 1 9 5.
Schematic 20 and Parts List - BP10P
Parts List - BP10P ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 DESCRIPTION 3.2 ALUMINUM DOMED RIVET #6 FLAT WASHER ZP BOTTOM HARNESS BOLT HARNESS MOUNTING WASHER LID LATCH FEMALE RIVET FOR BELT PANEL BELT PANEL MOUNTING SCREW THERMAL RESET SWITCH 5.
Powr-Flite Limited Warranty Powr-Flite will repair or exchange parts for your vacuum in the event of a manufacturing defect as follows: PARTS: New or comparable rebuilt parts, for three years after original purchase. Lifetime warranty on molded body. LABOR: Labor warranty for three years. Carry-in service can be obtained during the warranty period by taking your vacuum to an Authorized Powr-Flite Warranty Service Center.
