Tus neeg siv phau ntawv

■ Battery Safety
● Do NOT let the positive (+) and negative (-) terminals of the battery touch
each other.
● Use sealed Lead-Acid, Flooded, Gel, AGM, Lithium or Calcium batteries
which must be deep cycle.
● Explosive battery gases may be present while charging. Be certain there is
enough ventilation to release the gases.
● Be careful when working with large lead acid batteries. Wear eye protection
and have fresh water available in case there is contact with the battery acid.
● Over-charging and excessive gas precipitation may damage the battery plates
and activate material shedding on them. Too high of an equalizing charge or
too long of one may cause damage. Please carefully review the specific
requirements of the battery used in the system.
■ Installation Safety
● The unit should be installed in a well-ventilated, cool, and dry environment.
Make sure the fans of the unit and the ventilation holes are not blocked.
● Do not expose the unit to rain, moisture, snow, or liquids of any type.
3