Use and Care Guide

OPERATION

• Shut off the engine.

NOTE: Shutting OFF the engine will not relieve pressure in the system. Pull trigger to release

water pressure.

RINSING WITH THE PRESSURE WASHER

• Engage the lock out on the trigger handle by pushing up on the lock out until it clicks into the

slot.

• 



• 



• Start at the top of the area to be rinsed and work down, overlapping the strokes.

MOVING THE PRESSURE WASHER

NOTE: Never lift or carry this product using the handle.

• Turn the pressure washer off.

• Tilt the machine toward you slightly until it balances on the wheels then roll the machine to the

desired position. Do not tilt forward or sideways when moving.

• DO NOT attempt to move the unit by pulling on any of the hoses.