Use and Care Guide

OPERATION

WASHING WITH DETERGENT (See Figure 13)

WARNING

USE ONLY DETERGENTS DESIGNED FOR PRESSURE WASHERS. Do not use household



which can damage the pump or cause property damage. Many detergents may require mixing

prior to use. Prepare cleaning solution as instructed on the solution bottle. Always test in an

inconspicuous area before beginning.

• Remove the cap from the detergent tank and pour pressure washer detergent in the tank.

Replace cap on tank.

NOTE: The machine setting of this unit is 20:1, which usually allows the use of 1 gallon

pressure washer detergent without further dilution. Check your detergent instructions to be sure

additional dilution is not necessary.

• 

• 

• Spray the detergent on a dry surface using long, even, overlapping strokes. To prevent

streaking, do not allow detergent to dry on the surface.



• Fill the detergent tank with clean water.

• Spray the clear water through the spray wand until the tank is empty.

• If any soap remains in the spray, repeat with a second tank of clean water.

Fig. 13