Use and Care Guide

NOTICE

Routinely make a visual inspection of the pump and engine during use. If you notice any lubricant

leaking around the pump or engine seals, stop using the pressure washer immediately. Contact



damage.



• Put the on/off switch in the OFF position.

NOTE: Shutting off the engine will not relieve pressure in the system. Pull trigger to release

water pressure.

WARNING

While operating and storing, keep at least 3 feet of clearance on all sides of this product,

including overhead. Allow a minimum of 30 minutes of “cool down” time before storage. Keep





objects, and/ or damage high pressure hoses that can result in an injection injury.

OPERATION

Fig. 10

Choke

On/STAR

Switch