Use and Care Guide
15
ASSEMBLY
CONNECTING THE GARDEN HOSE
See Figure 7.
CAUTION
Always observe all local regulations when connecting hoses to the water main. Some areas have
restrictions against connecting directly to public drinking water supply to prevent the feedback of
preventer is usually permitted.
• Uncoil the garden hose.
• Run water through the hose for 30 seconds to clean any debris from the hose.
• Inspect the screen in the water intake.
• If the screen is damaged, do not use the machine until the screen has been replaced.
• If the screen is dirty, clean it before connecting the garden hose to the machine.
• With the hose faucet turned completely off, attach the end of the garden hose to the water
intake. Tighten by hand only.
Fig. 7