Owner manual

Deckmate 25 Installation
IMPORTANT: REVIEW THESE INSTALLATION INSTRUCTIONS BEFORE INSTALLING!
There are 5 steps to installing the Deckmate 25 that must be completed in the order below for proper installation:
1. Assembling, locating, and installing the bow roller.
2. Locating and installing the winch mechanism.
3. Deciding location for switch (on the winch or at the helm).
4. Installing the switch and wiring the winch to the battery.
5. Assembling the cover and unit test.
STEP 1. Assembling, locating and installing the bow roller.
The bow roller comes unassembled in the packaging with the windlass. Locate the parts shown below before start-
ing the assembly:
3
Operating Instructions and Replacement Parts List Deckmate 25 Free Fall Pontoon Windlass
Deckmate 25 Freefall Pontoon Windlass Product and Performance Specifications
Maximum Line Size, Average Line Motor Circuit Unit
Anchor Type, and No Load Speed With Operating Breaker Unit Dimensions
Model Weight Length Line Speed 50 lb. Anchor
Voltage Rating Weight (LxWxH)
Deckmate 25 50 lbs 3/16” dia
Nylon,
100’ long
85 ft/min 33 ft/min 12V DC 25 amps 15 lbs. 12.25x8.5x8.25
P10951 BOW ROLLER HOUSING P55710 ROLLER P55715 BOW ROLLER LOOP
P55712 BOW ROLLER SPACER
P55703 ROLLER BOLT STO70932AV WASHER P55704 HEX NUT