User's Manual

USU
 USER MANUAL
DCM000000104
Printed: 03.05.21,10:40
Revision Date:5/21/03
12
Frequency Bands Refer to Model Chart
Maximum Downlink Power
+38 dBm IP3 Minimum for iDEN, Cell, Page
+36 dBm IP3 Minimum for PCS
(see Remote Module Carrier De-Rating Chart)
Maximum Uplink Power
Combined at any Head-End RF Output.
Includes the 4-way combiner loss.
+4 dBm IP3 Minimum, iDEN/Cell/Page
0 dBm IP3 Minimum, PCS
(7 to 12dB higher for LNKFIB-H01)
Downlink Gain
from Head-End to the Remote Module
Antenna Port, assuming 0dB Fiber-Optic Link
+20 dB after Gain Adjustment
Typical range before Gain Adjust is
+20 to +35 dB for 800-900 MHz Bands
+20 to +31dB for 1.9 GHz Bands
(See Gain Adjustments)
Downlink Gain Ripple
+/- 2.5 dB, iDEN, Cell, Page
+/- 3 dB, PCS
Uplink Gain
from Remote Module Antenna Port to Head-End,
assuming 0dB Fiber-Optic Link
+20 dB after Gain Adjustment
Typical range before Gain Adjust is
+20 to +32 dB for 800-900 MHz Bands
+20 to +32dB for 1.9 GHz Bands
(See Gain Adjustments)
Uplink Gain Ripple
+/- 2.5 dB, iDEN, Cell, Page
+/- 3 dB, PCS
Max RF Input without Damage
To Head-End Units
+10 dBm
Uplink Noise
at Head-End Unit from any Remote Module Antenna
Port assuming 0dB Fiber-Optic Link
< -130 dBm/Hz
(with Uplink Gains Balanced)
Isolation
Consult Kaval Engineering Services
(depends upon Head-End Filtering)
Duty Cycle Continuous
Spurious Outputs
-20 dBm max per Remote Module Antenna Port
when operated as per De-rating Chart
Optical Power Level
Laser Warning: Invisible Laser Radiation emitting
from optical connector. Avoid direct exposure to
beam. 150 mW max. @1300nm. Class IIIb. Product
complies with 21 CFR 1040.10 and 1040.11.
Optical Path Loss 2 dBO Maximum
Group Delay <2uS, NOT including Fiber-Optic Link
Connectors
SC/APC Fiber-Optic, SMA (50ς) RF
D-Sub Data & Control
Head-End Module Power Supply Requirements 120 VAC, 50/60 Hz, 120 VA Typical, 200 VA Max.
Remote Module Power Supply Requirements
28 VDC from external Power Supply
0.75 Ampere Maximum
and 24VDC "Gell-Cell" Battery Backup Option
Configuration Options
Either via the USU network and a Gateway Module,
or via a PC and an RS-232 Connection.
Operating Temperature Range -20 to +50
o
C
Operating Humidity Range 5 to 90% RH, Non-Condensing
Head-End Module Size & Weight 1U High 19” Rack Unit, 14" Deep, 16 lbs Max
Remote Module Size & Weight 2.75” High, 9.25” Wide, 11” Deep, 7 lbs Max
FCC Identifiers
FCC: H6M-US800TP FCC: H6M-US800C
FCC: H6M-US900P FCC: H6M-US1900P
Industry Canada Certifications
IC: 1541A-US800TP IC: 1541A-US800C
IC: 1541A-US900P IC: 1541A-US1900P
Module Specifications