User's Manual

USU

 USER MANUAL

DCM000000104

Printed: 03.05.21,10:40

Revision Date:5/21/03

User I/O Connection: This is a standard 15-pin Female D-Sub

Connector...

DB15 Pin #

Signal

1 CAN High

9 CAN Low

8 CAN Common

2 Fault Relay - Closed for Fault

3 Fault Relay - Common

5 Fault Relay - Open for Fault

6 +28 VDC at up to 0.5 Amp

7 Ground

10 Aux. In #1 (contact to ground)

11 Aux. In #2 (contact to ground)

12 Aux. In #3 (contact to ground)

13 Aux. Out #1 (open collector)

14 Aux. Out #2 (open collector)

15 Aux. Out #3 (open collector)

The Form-C Relay is rated at 30 VDC or 30 VAC @ 0.5 Amp. The Aux. lines are

under custom software control.

Also, refer to the DCM000000103 CAN Wiring Guide.

Note that the ASY00420 DB15 Breakout Kit may be ordered to bring the User I/O

connections out to screw terminals for easy wiring...

This 4" x 4" Board mounts onto four 3.5" x 3.5" #6 locations, and includes a 6' DB15

to DB15 Cable.

At the rear of the remote unit are the Power and Battery connections...