User's Manual
Table Of Contents
- Overview
- Standard Models
- Filter Kits
- Accessories
- Accessories for Stainless-Steel Weather-Resistant Enclosures
- Fiber Optic Options
- Installation
- RF Deck Connections
- Battery Backup
- In-Hancer Plus BDA Specifications
- Carrier De-Rating
- Indicators
- Configuration
- Antenna Installation
- FCC Information to Users
- Maintenance & Safety
- Standard Warranty
- Return & Repair
- Parts & Accessories
In-Hancer Plus BDA
USER MANUAL
DCM000000105
It is possible to re-configure an In-Hancer Plus BDA in the field, either with a
Personal Computer (PC) or via the optional LinkNet Gateway Module. To use a
PC it is necessary to use a straight-through DB9 male to female cable to connect the
RS232 Port #1 DB9 connector on the RF Deck to a standard DB9 RS232 Connector
on the PC. On the PC a terminal emulation program such as HyperTerminal is used
to communicate to the In-Hancer Plus BDA. The settings are 9600 baud, 8 bits, no
parity, and 1 stop bit. Commands are one or two words followed by pressing Return.
Commands may be given in upper or lower-case. Available commands are...
Configuration
ACCESS USER Required as a simple password to gain access to customer
settable parameters and diagnostics; This will time-out after 10
minutes, and may have to be re-typed.
HELP or ? Displays a list of Available Commands.
LIST Displays Current Settings and Status Faults, Etc.
VER Display the current Version of Software.
ENABLE 1 or 0 Enables or Disables the Module.
DLEN 1 or 0 Enables or Disables the Downlink Amplifier.
ULEN 1 or 0 Enables or Disables the Uplink Amplifier.
DLGAIN ### Displays or Sets the Downlink Gain (in tenths of a dB).
ULGAIN ### Displays or Sets the Uplink Gain (in tenths of a dB).
DLAGC ### Displays or Sets the Downlink AGC Level (in tenths of a dBm).
ULAGC ### Displays or Sets the Uplink AGC Level (in tenths of a dBm).
DLAGCEN 1 or 0 Enables or Disables Downlink AGC.
ULAGCEN 1 or 0 Enables or Disables Uplink AGC.
NETID ### Sets the Network ID.
BACKUP 0, 1, or 2 Sets the Power Supply Backup to None (0), Battery (1), Power
Supply (2).
Please consult Kaval Wireless Technologies for further support.
Printed: 03.10.14,09:37
Revision Date:10/14/03
24