User's Manual
Table Of Contents
- Overview
- Standard Models
- Filter Kits
- Accessories
- Accessories for Stainless-Steel Weather-Resistant Enclosures
- Fiber Optic Options
- Installation
- RF Deck Connections
- Battery Backup
- In-Hancer Plus BDA Specifications
- Carrier De-Rating
- Indicators
- Configuration
- Antenna Installation
- FCC Information to Users
- Maintenance & Safety
- Standard Warranty
- Return & Repair
- Parts & Accessories
In-Hancer Plus BDA
USER MANUAL
DCM000000105
The three LED Indicators on the RF Deck are...
Indicators
POWER: This LED will be GREEN when the BDA is operating.
FAULT: This LED will light AMBER for any Fault Condition.
AGC: This LED will light AMBER when the Power Limiting is on.
The optional SB-LITE External Lamp indicates...
Normal Operating Conditions: Lighted Steadily.
Fault Conditions: Flashing
Loss of all Power: Off
The In-Hancer Plus BDA continuously performs internal diagnostics. If a fault is
detected it will activate its Fault LED and Fault Relay. Faults detected include...
•
•
•
Over Temperature
Over / Under Current
Misc. Internal Faults
Detailed Faults are detected by the optional Gateway Module. Details may also be
determined via an RS232 connected Terminal Emulator using the LIST command.
Printed: 03.10.14,09:37
Revision Date:10/14/03
23