User's Manual

In-Hancer Plus BDA
 USER MANUAL
DCM000000105
Frequency Bands
See Model Charts
Passband Ripple
(Typical)
± 2.5 dB
(Depends upon Filtering choices)
Gain Range
(Typical)
30 to 80dB Typical for 800-900 MHz Models
28 to 78dB for UHF Models
(the gains have some variation
for certain filtering combinations)
Digital Gain Adjustment
In 1 dB Increments
AGC
(Power Levelling)
When active will limit composite output
power to a level between +15 to +30dBm.
Has fast attack and slow decay so as to
NOT interfere with complex signals such as
CDMA, GSM, iDEN, etc.
AGC Dynamic Range
40dB for 800-900 MHz Models
25dB for UHF Models
RF Power
3'rd Order Intercept Point IP3
+45 dBm Typical for 800-900 MHz Models
+44dBm Typical for UHF Models
(see de-rating chart)
Noise Figure
< 8 dB for 800-900 MHz Models
<12dB for UHF Models
Propagation Delay
<5 µs
(dependent upon filtering choices)
Impedance
50 ohms
VSWR
<2:1
Maximum RF Input
+10 dBm without damage
Primary Power
120/240VAC, 50-60Hz,
100VA Typical, 150VA Max.
Optional Secondary Power /
Battery Backup
Two 12 VDC Sealed Lead -Acid
Batteries, 10-100 AH.
See DCM000000102.
Dimensions W x H x D
(incl. Heatsink,
but NOT Mounting Tabs)
Approx. 17"x16.5"x11" for Small Enclosures
Approx. 27"x24"x11" for Large Enclosures
Weight
60 lbs. approx. for Smaller Enclosure
120 lbs. approx. for Larger Enclosure
Housing
Rugged - Wall Mountable
Stainless Steel options for
weather resistant.
Connectors
N female
Operating Temperature Range
-10°C to +50°C
Humidity
5% to 95% RH Max, Non-Condensing
FCC Identifier
FCC: H6M-SB400 UHF
H6M-SB800 800-900 MHz
Industry Canada Certification
IC: 1541A-SB400 UHF
1541A-SB800 800-900 MHz
In-Hancer Plus BDA
Specifications
NOTE: The Stainless Steel Enclosures are sealed for enhanced
Weather / Water Resistance.
Printed: 03.10.14,09:37
Revision Date:10/14/03
21