User's Manual
Table Of Contents
- Overview
- Standard Models
- Filter Kits
- Accessories
- Accessories for Stainless-Steel Weather-Resistant Enclosures
- Fiber Optic Options
- Installation
- RF Deck Connections
- Battery Backup
- In-Hancer Plus BDA Specifications
- Carrier De-Rating
- Indicators
- Configuration
- Antenna Installation
- FCC Information to Users
- Maintenance & Safety
- Standard Warranty
- Return & Repair
- Parts & Accessories
In-Hancer Plus BDA
USER MANUAL
DCM000000105
If the In-Hancer Plus BDA is being used without a Battery it must be configured to
NOT use a battery. Without a battery the BDA will shut down or reset with any
disruption to the AC power. When power is re-established the system will restart
automatically within 30 seconds. External batteries may be connected using the
SB-
BATT-CAB
Battery Cable. The BDA has a built-in battery charger that will
automatically recharge the attached battery.
Battery Backup
Refer to DCM000000102 "Battery Backup Manual".
For Battery Backup purposes...
Vbat = 24 VDC Ic = 0.5 Ampere Id = 2.5 Ampere
Printed: 03.10.14,09:37
Revision Date:10/14/03
20