User's Manual
Table Of Contents
- Overview
- Standard Models
- Filter Kits
- Accessories
- Accessories for Stainless-Steel Weather-Resistant Enclosures
- Fiber Optic Options
- Installation
- RF Deck Connections
- Battery Backup
- In-Hancer Plus BDA Specifications
- Carrier De-Rating
- Indicators
- Configuration
- Antenna Installation
- FCC Information to Users
- Maintenance & Safety
- Standard Warranty
- Return & Repair
- Parts & Accessories
In-Hancer Plus BDA
USER MANUAL
DCM000000105
Mounting the In-Hancer Plus BDA
The physical installation is accomplished by mounting the enclosure onto a vertical
wall. Ensure that the unit is mounted in the upright position, as indicated by the
upright Kaval Wireless Technologies’ logo. Using four mounting lugs on the
enclosure as a template insert four bolts to the wall. Make sure the bolts are capable
of supporting the weight. The enclosure can be mounted as described below:
Raise the enclosure so that it about 1” to 3” away from the bolts so that one
can see the bolts through the larger diameter of the keyhole slots.
Move the enclosure closer to the wall so that those four keyhole type slots are
hooked onto the bolts.
Slide the enclosure down until all bolts fit well in the narrow part of the keyhole
slots.
Enclosure "H" "W"
Small Painted Enclosure TBD TBD
Small Stainless Steel Enclosure 18.0" 11.5"
Large Painted Enclosure TBD TBD
Large Stainless Steel Enclosure 26.0" 18.0"
NOTE: The Stainless Steel Enclosures are
sealed for enhanced Weather / Water
Resistance.
Printed: 03.10.14,09:37
Revision Date:10/14/03
15