User's Manual
Table Of Contents
- Overview
- Standard Models
- Filter Kits
- Accessories
- Accessories for Stainless-Steel Weather-Resistant Enclosures
- Fiber Optic Options
- Installation
- RF Deck Connections
- Battery Backup
- In-Hancer Plus BDA Specifications
- Carrier De-Rating
- Indicators
- Configuration
- Antenna Installation
- FCC Information to Users
- Maintenance & Safety
- Standard Warranty
- Return & Repair
- Parts & Accessories
In-Hancer Plus BDA
USER MANUAL
DCM000000105
Installation
In-Hancer Plus BDA Enclosures
There are four standard BDA Enclosures, 2 sizes (Large and Small) of Painted
Enclosures suitable for use in Electrical Rooms, and 2 sizes (Large and Small) of
Stainless-Steel Enclosures which are sealed for enhanced Weather / Water
Resistance.
Painted Enclosure Photo is TBD
Un-Packaging
Each In-Hancer Plus BDA is carefully packaged for air shipment. Any damage
incurred during the transportation must be claimed from the shipper. Make sure the
following necessary equipment and hardware are available and undamaged.
In-Hancer Plus BDA (supplied by Kaval Wireless Technologies)
Two 50-Ohm jumper cables (not supplied by Kaval Wireless Technologies)
AC power cord.
AC Outlet is nearby (not supplied by Kaval Wireless Technologies)
Mounting hardware such as: Four washers and four bolts (not supplied by Kaval
Wireless Technologies)
Make sure the mounting area is large enough to accommodate the installation of
the enclosure and free airflow is available on both sides of the cabinet.
Printed: 03.10.14,09:37
Revision Date:10/14/03
14