User's Manual

In-Hancer Plus BDA

 USER MANUAL

DCM000000105

Printed: 03.08.01,15:54

Revision Date:8/1/03

If the In-Hancer Plus BDA is being used without a Battery it must be configured to

NOT use a battery. Without a battery the BDA will shut down or reset with any

disruption to the AC power. When power is re-established the system will restart

automatically within 30 seconds. External batteries may be connected using the

SB-

BATT-CAB

Battery Cable. The BDA has a built-in battery charger that will

automatically recharge the attached battery.

Refer to

DCM000000102 "Battery Backup Manual".

For Battery Backup purposes...

Vbat = 24 VDC Ic = 0.5 Ampere Id = 2.5 Ampere

Battery Backup