User's Manual

Planning and PreparationPlanning and PreparationIntroduction

MCPS2135 System Operation 13

• Work gloves

• Steel-toe shoes

• Back-support belt

Tools

• Box knife

• Pair of large scissors

• Inspection flashlight or lamp

• Pen or pencil

• Strap cutter

• Straight-blade screwdriver

Other Materials

• A copy of the Purchase Order

• A copy of the Packing List

Unpack equipment

1. Open the shipping container(s) and inspect the contents. Using the required

safety equipment and tools, carefully cut the metal and/or nylon straps that

surround the shipping containers. When using a box knife or scissors, take

care not to damage the contents of the box. Take care to avoid scratching the

cabinet finish.

2. Do not remove the ESD protective wrapping that surrounds the cabinet, unless

wearing an ESD protective wrist strap. If possible, remove this material by

unwrapping the MCPS2135 by hand, rather than cutting this material with

scissors or knives. Spectrian recommends not removing the protective

wrapping until installation.

3. Remove spacers, packing inserts, protective coverings, plastic bags, and other

shipping materials from the outside of the MCPS2135. Avoid using knives or

scissors to perform this task.

4. Carefully collect and dispose of the packing materials. Many of the packing

materials used by Spectrian are suitable for recycling and need not contribute

to landfills.

5. While inspecting the unpacked MCPS2135, compare the quantity and labeling

of each module with shipping documents and the purchase order. If there is

an unresolved discrepancy between the order and the items received, contact

your Spectrian representative.

6. Inspect the MCPS2135 exterior for evidence of shipping damage. Metal

surfaces should not be dented or scratched. Panels, handles, screws, and

indicators should appear undamaged and properly aligned. Connectors should

be tightly affixed to the cabinet, with no visible dents or distortion.

. Note: If you discover damage during inspection, contact the shipper and

Spectrian at once. The shipper will furnish instructions on how to document the

discovered damage. Spectrian will arrange to promptly ship replacement parts.