User's Manual

Planning and PreparationPlanning and PreparationIntroduction

12 MCPS2135 Operations Manual

After verifying the power of each individual channel individually, ensure that the

total average input power remains less than or equal to the maximum rated

composite power calculated in (G) of the worksheet.

1. Key-on all channels at one time, including any CDMA F.A.s, and

measure input power.

2. If the average composite input power exceeds the calculated average

composite input power (line H), readjust all channels as necessary to

ensure average input power remains less than or equal to specifications.

Turn off all channels. The drive power is now set properly.

1.42.4 Prepare for Installation

Before beginning the installation, verify that all the necessary site and radio

information, installation materials, tools, and MCPS2135 equipment are on hand.

Correct any problems or omissions before continuing. Refer to the following

Receiving and Unpacking Procedure to prepare the MCPS2135 equipment.

1.1.12.4.1 Inventory Received Equipment

1. Upon receipt of the MCPS2135, remove the packing lists, installation kit, and

other documents attached to the shipping container.

2. Examine shipping documents to make certain that they agree with your copy

of the order. If there is a discrepancy between the order and the items or

quantity shipped, contact your Spectrian Customer Service representative

listed in Appendix A1 of this manual.

3. Check the packing list and verify that all necessary equipment has been

delivered, and that the parts are undamaged. If any evidence of shipping

damage is noted, notify the delivery agency before continuing.

∗ Caution: If the container or contents appear to be damaged, you must contact

the carrier without delay and file a damage claim. If shipping damage occurred,

the carrier may wish to have a claims agent present when the MCPS2135 is

unpacked and inspected. To protect your warranty rights, you must also notify

your Spectrian representative and advise that the MCPS2135 was damaged

during shipment.

2.4.2 Unpack Received Equipment

Uncrating, inspecting, and preparing the MCPS2135 for site installation will

require some tools and materials not included in the shipment. Use of the

following materials is suggested to perform these tasks.

. Note: Assemble all tools, materials, and safety equipment before beginning

work.

Safety Equipment

• Safety glasses