Operations Manual

Prepare for Installation
MCPS2000 Operations Manual
Spectrian Proprietary -- See notice on first page
10
scissors or knives. Spectrian recommends not removing the protective wrapping
until installation.
3. Remove spacers, packing inserts, protective coverings, plastic bags, and other
shipping materials from the outside of the MCPS2000. Avoid using knives or
scissors to perform this task.
4. Carefully collect and dispose of the packing materials. Many of the packing
materials used by Spectrian are suitable for recycling and need not contribute to
landfills.
5. While inspecting the unpacked MCPS2000 compare the quantity and labeling of
each module with shipping documents and the purchase order. If there is an
unresolved discrepancy between the order and the items received, contact your
Spectrian representative.
6. Inspect the MCPS2000 exterior for evidence of shipping damage. Metal surfaces
should not be dented or scratched. Panels, handles, screws, and indicators should
appear undamaged and properly aligned. Connectors should be tightly affixed to
the cabinet, with no visible dents or distortion.
☛ Note: If you discover damage during inspection, contact the shipper and Spectrian
at once. The shipper will furnish instructions on how to document the discovered
damage. Spectrian will arrange to promptly ship replacement parts.
C Repackaging for Return Shipment
Detailed repackaging instructions are beyond the scope of this document. If it
becomes necessary to repackage parts of the MCPS2000 for return shipment to the
factory, contact Spectrian Customer Service for detailed instructions..