User's Manual
SatelLink
! USER MANUAL
DCM000000052
Printed: 01.05.11,14:10
Revision Date:5/11/01 11
Frequency Bands
Downlink: 851-866 MHz iDEN
869-894 MHz Cellular
928-941 MHz Paging
1930-1990 MHz PCS
Uplink: 806-821 MHz iDEN
824-849 MHz Cellular
896-902 MHz Paging
1850-1910 MHz PCS
Maximum Power
from any one of eight
Remote Module Antenna Ports
iDEN/Cell/Paging Combined:
+35 dBm IP3 Typical
PCS Combined:
+33 dBm IP3 Typical
Gains
from any one of eight\
Remote Module Antenna Ports
referenced to Head-End Unit,
assuming 0dB Fiber-Optic Link
Downlink: +28 dB Maximum
(7 dB Gain Reduction
Adjustment Range per Band)
Uplink: -4 to +2 dB
Uplink Noise
at the Head-End Unit from
any one of eight
Remote Module Antenna Ports
assuming 0dB Fiber-Optic Link
< -130 dBm/Hz (Spec. Goal)
Uplink Isolation
from any one of eight
Remote Module Antenna Ports
to the Head-End Unit RF output
assuming 0dB Fiber-Optic Link
Any to Any Band: -60 dB Max, -70dB Typ.
except...
iDEN to Cell: -37 dB Max, -65dB Typ.
Cell to Paging: -45 dB Max, -70dB Typ.
PCS to PCS: -45 dB Max, -65dB Typ.
Downlink Isolation Not Spec., Relies upon Head-End Filtering
Duty Cycle
Continuous
Spurious Outputs
-13 dBm max per Remote Module Antenna Port
when operated as per De-rating Chart
Optical Power Level
Laser Warning: Invisible Laser Radiation emitting
from optical connector. Avoid direct exposure to
beam. 150 mW max. @1300nm. Class IIIb. Product
complies with 21 CFR 1040.10 and 1040.11.
Optical Path Loss
2 dBO Maximum
Group Delay
<8uS (Spec. Goal)
NOT including Fiber-Optic Link
Connectors
SC/APC Fiber-Optic, SMA (50Ω) RF
D-Sub Data & Control, 3-Pin AC Power
Head-End Module Power Supply Requirements
120 VAC, 50/60 Hz
120 VA Typical, 200 VA Maximum
Remote Module Power Supply Requirements
120/240 VAC, 50/60 Hz
120 VA Typical, 200 VA Maximum
Configuration Options
May be configured either via the SatelLink network
and the Head-End Control Module, or via a PC and
an RS-232 Connection.
Operating Temperature Range
-10 to +40
o
C
Operating Humidity Range
5 to 90% RH, Non-Condensing
Head-End Module Size & Weight
1U High 19” Rack Unit, 14" Deep
xx lbs, xx kg Max (TBD)
Remote Module Size & Weight
24” High, 24” Wide, 9” Deep,
NOT incl. mounting tabs
xx lbs, xx kg Max (TBD)
Module Specifications