User's Manual

LinkNet™ LNKA RF MODULES z USER MANUAL
DCM000000054
Printed: 03.12.15,10:19
Revision Date:12/15/03 7
Software Set-up
LNKA modules are shipped with the following factory set options:
OPTION RANGE OF VALUES DEFAULT VALUE
Frequency See Model Chart Order Specific
Gain +34 to +84 dB +34 dB
AGC +15 to +30 dBm or Disabled +30 dBm
Module Enabled On / Off On
Default values may be changed when an order is placed. Check your order
confirmation (shipped with modules) for customized values.
In line with the versatility of the LinkNet
TM
Platform, it is possible to re-configure the
LNKA module in the field. For further information on the modification software and
the PC adapter, contact KAVAL WIRELESS TECHNOLOGIES by E-mail:
[e-mail]
Configuration
In line with the versatility of the LinkNet
TM
Platform, it is possible to re-configure the
LNKA module in the field, either with a Personal Computer (PC) or via the optional
Control Module. To use a PC it is necessary to have a Kaval CAB000000057
Control Cable to connect between the appropriate Module's DB15 connector on the
back of the Card-Cage and the standard DB9 RS232 Connector on the PC. On the
PC a terminal emulation program such as HyperTerminal is used to communicate
to the LinkNet Module. The settings are 9600 baud, 8 bits, no parity, and 1 stop bit.
Commands are one or two words followed by pressing Return. Commands may be
given in upper or lower-case. Available commands are...
ACCESS USER: Required as a simple password to gain access to customer
settable parameters and diagnostics; This will time-out after 10
minutes, and may have to be re-typed.
HELP or ?: Displays a list of Available Commands.
LIST: Displays Current Settings and Status Faults, Etc.
VER: Display the current Version of Software.
ENABLE 1 or 0: Enables or Disables the Module.
GAIN ###: Displays or Sets the Module Gain (in tenths of a dB).
AGCTHRESH ###: Displays or Sets the AGC Level (in tenths of a dBm).
AGCEN 1 or 0: Enables or Disables AGC.
Please consult Kaval Wireless Technologies for further support.
Operation