User's Manual

LinkNet™ LNKA RF MODULES z USER MANUAL
DCM000000054
Printed: 03.12.15,10:19
Revision Date:12/15/03 10
Normal Operation
The LNKA Module has six LED’s on the faceplate:
1. OPERATING - Operating normally.
2. STANDBY – Under the control of the Gateway Module.
3. TRANSMIT – No function on these Modules.
4. RECEIVE – No function on these Modules.
5. PROGRAM – This LED will be constant Amber when the unit is being re-
programmed by the Controller Module. This will signify that the unit is
powered on but unavailable for use.
6. FAULT – Red LED, If the internal diagnostics for the module detect a
problem, then this LED will remain on