User's Manual

350 West Java Drive
Sunnyvale, CA. 94089
USER’S MANUAL
GSM Dual Amplifier Booster/ Combiner
REMEC Model Number xxxxxxxxx
GSM Booster User’s Guide Page 2 of 3
• Adjust the input power level to ensure the output power level is in compliance with the values
indicated in Table 1 or Table 2 depending upon the mode of operation (Combined or Isolated).
(Note : The user must adjust the RF input power to the Booster Amplifier such that the RF
output power level does not exceed the FCC certified power levels. The FCC certified power
level is determined by the RF output spectral emissions to be compliant with the FCC spurious
emissions limit of -13 dBm outside of the assigned frequency block. Near the block edges, the
GMSK signal is such that the output power level must be further reduced so that the -13 dBm
spurious level is not exceeded.) (These levels must not be exceeded for FCC compliance.)
2. Table 1: Maximum Combined Mode Output Power per Carrier
Block Channel Center
Frequency (MHz)
Maximum RF
Output Power
per Carrier
(dBm)
Combined
Port
Maximum RF
Output Power
per Carrier
(W)
Combined
Port
A 1930.2
A 1930.4 - 1944.6
A 1944.8
46 40
B 1950.2
B 1950.4 - 1964.6
B 1964.8
46 40
C 1975.2
C 1975.4 - 1989.6
C 1989.8
46 40
D 1945.2
D 1945.4 - 1949.6
D 1949.8
46 40
E 1965.2
E 1965.4 - 1969.6
E 1969.8
46 40
F 1970.2
F 1970.4 - 1974.6
F 1974.8
46 40