User's Manual

l Page 8 Kaval Telecom Inc. DCM000000001
• BDA CONTROLLER OPERATION
The BDA Controller is a microprocessor based part of a Kaval BDA that provides all control, fault monitoring, and settings for the
BDA. It interfaces to the 28 VDC Power Supply, the optional 24 VDC Battery (both monitoring, transferring, and charging), control
signals to the Boosters, and provides monitored DC power for the Boosters and PA’s. Overall dimensions of the case are 9”
(including flanges) x 3.5” x 1.25”. The heatsink extends about 1.75 inches above the case and is 4 inches wide.
BDA OK
BATT
PA
AGC
BOOST PA
DOWNLINKUPLINK
BDA CONTROLLER
PWR FAIL TEMP FAN
ON
OFF
POWEREXIT
SELECT
ADJUST
BATT BOOST
The BDA Controller display is a 2 line by 20 character Vacuum Fluorescent (VFD) display. The connectors are all secure lock
types and should only be plugged and unplugged by a service technician.