User's Manual

Local Connection
The OMT32/PC port intended to be used for local connection to repeaters
can be selected as described below.
Select the Local Connection option in the OMT Preferences menu.
The Local Connection Parameters dialog box, see Figure 9-1, is opened.
In the Communication port box, select PC port for local connection.
Click the Ok button.
The local connection port can also be set in the OMT32 setup program
(see the Initial Settings section in Chapter 6).
ALLGON
Figure 9-1. Local connection port
ALLGON System AB AR Repeaters & OMT32 Software – OMT32 Features
User’s Manual VD202 90/EN Rev. 1A 1999-07 9 - 3