User's Manual

13. In the OMT Log File Settings dialog box, select the OMT32 log file.
Log file in old catalog
The log file is further
detailed on page 6-11.
Shows the currently used log file. At upgrading to a new OMT
version, the old log file in the old program folder is shown.
By selecting this option, OMT32 will continue writing to this log file.
Log file in current catalog
Suggests a new log file in the current program folder. If OMT32
already uses a log file located in the current program folder, then this
path is the same as the above path.
When upgrading the OMT version, the suggested new log file can be
created by clicking the Create button, which appears if the suggested
log file does not exist (none is shown in the lines and chrs boxes).
A new log file with a different path or name can also be created by
clicking the Change button and selecting a new path or name.
Current length of selected log file
Selected log file size, in number of lines and characters, is shown in
the lines and chrs boxes. (none) is shown if the log file does not exist.
Log file actions
Selected log file can be cleared, edited or printed out using the Clear,
Edit, and Print buttons.
When ready, click the Finish button.
Figure 6-6. Log file settings
ALLGON System AB AR Repeaters & OMT32 Software – OMT32 Installation
User’s Manual VD202 90/EN Rev. 1A 1999-07 6 - 6