User's Manual

Repeater CU Software and Hardware Compatibility
There are different versions of repeater CU software, which can be
combined with boards of various revisions. These have, however, unique
part numbers and revision information. Below, you will find a table of
repeater software currently available in combination with CU board
revisions.
CU Software
Part #
Latest
Software
Revision
Compatible
with
CU board
Comments
SA102 01/2 R2E K103/1
or
K103/2
For GSM channel selective
≤ 4 channels, band selective
800-900MHz fixed band
width only, and combi
(800/900MHz).
No traffic statistics.
SA102 02/1 R3A K103/2 For GSM, EGSM, DCS,
PCS channel selective
≤ 8 channels, band selective
800-900MHz fixed or
adjustable band width,
band selective 1800MHz or
1900MHz and combi.
Supports R2R link.
SA102 02/2 R1B* K103/2 For 800/1900MHz CDMA
≤ 2 channels.
*
R1B available August 1999 (800MHz CDMA added)
This information is updated 1999-07-01. As new versions of hardware
and software are released without prior noticing, contact your Allgon sales
representative if in doubt about the latest revision status.
For detailed information, refer to the release notes for the CU software to
be downloaded (normally found in the readme.txt file, which is supplied
with the program files).
ALLGON System AB AR Repeaters & OMT32 Hardware – Functional Description
User’s Manual VD202 90/EN Rev. 1A 1999-07 5 - 25