User's Manual

Operations
Active Repeater Part
Toggles between active channel selective part and band selective part, if
OMT32 is connected to a combined repeater.
See Active Repeater Part (Combined Repeater Only) in Chapter 10.
Configuration
Shows the configuration for channel selective or band selective operation
depending on the type of the connected repeater.
See the Repeater Configuration section in Chapter 10.
Statistics
Opens a dialog box in which status parameters can be set and displays
status for the statistics.
See the Traffic Statistics section in Chapter 10.
Read Status
Shows operational status for channel selective or band selective operation
depending on the type of the connected repeater.
See the Operational Status section in Chapter 10.
Testpoints
Opens the following sub menu:
Boards (CHA/BSA/CSA/PA)
Shows the values from the testpoints located on the channel selective or
band selective amplifier boards.
See the Testpoints section in in Chapter 10.
ALLGON System AB AR Repeaters & OMT32 Appendix A - Menu Reference Guide
User’s Manual VD202 90/EN Rev. 1A 1999-07 A - 7