User's Manual
Table Of Contents
- Front Page
- Contents
- Figures
- New Features in OMT32 Version R1A
- Abbreviations
- Part 1 – Hardware
- 1. Safety
- 2. Introduction
- 3. Installation
- 4. Commissioning
- 5. Functional Description
- Repeater Design
- Block Diagram
- Board and Unit Descriptions
- DC - Directional Coupler
- DPX - Duplex Filter
- LNA - Low Noise Amplifier
- CHA - Channel Amplifier Board for Channel Selective Operation
- CSA and PA Boards for Channel Selective CDMA Operation
- BSA and PA Boards for Band Selective Operation
- DIA Board
- CU Control Unit Board
- Repeater CU Software and Hardware Compatibility
- Cabling
- Part 2 – Software
- 6. OMT32 Installation
- 7. Help
- 8. Getting Started
- 9. OMT32 Features
- 10. Repeater Operations
- 11. Alarms and Events
- 12. Troubleshooting
- 13. Optional
- Appendix A - Menu Reference Guide
- Index
- Questionnaire
Notepad
Opens the window for a notepad facility in which the text is stored in the
repeater and available for operators and service personnel, locally or
remotely connected.
See the Notepad section in Chapter 10.
Revision Manager
Opens the following sub menu:
CU Maintenance
Shows the CU hardware and software part numbers and revision status,
and allows CU software to be downloaded to the repeater from OMT32,
either locally or remotely connected.
Do not update or reboot the CU software unless you are authorized and
trained to download software to repeaters.
See the CU Software Maintenance section Chapter 10.
Subunits
Shows software and hardware version, serial number and manufacturing
data for installed amplifier boards.
See Repeater Boards (CHA/BSA/CSA/PA/RIA) in Chapter 10.
ALLGON System AB AR Repeaters & OMT32 Appendix A - Menu Reference Guide
User’s Manual VD202 90/EN Rev. 1A 1999-07 A - 6