User's Manual

Repeater Preferences
Repeater Type
Shows, for combined repeaters, active repeater unit (channel selective or
band selective unit).
See Active Repeater Part (Combined Repeater Only) in Chapter 10.
Repeater ID
Opens the dialog box in which the repeater ID can be changed.
See the Repeater ID section in Chapter 10.
Date and Time
Opens the dialog box for setting the CU board clock in the repeater.
See the Repeater Date and Time section in Chapter 10.
Alarm Configuration
Shows the alarm configuration. Alarm levels can also be selected for the
external alarm inputs.
See the Alarm Configuration section in Chapter 11.
Alarm Call Criteria
Shows the phone numbers and call time intervals for alarm calls. This
information can also can be changed in the window which is opened.
See the Alarm Call Criteria section in Chapter 11.
Modem
Opens the dialog box for viewing and changing the repeater modem
initiation string.
Be careful not to set an incorrect string at remote control. A visit to the
repeater site may be the result, and you will get no alarm call until a
correct string has been entered. The default string should not be changed.
See the Repeater Modem Parameters section in Chapter 10.
ALLGON System AB AR Repeaters & OMT32 Appendix A - Menu Reference Guide
User’s Manual VD202 90/EN Rev. 1A 1999-07 A - 5