User's Manual
Table Of Contents
- Front Page
- Contents
- Figures
- New Features in OMT32 Version R1A
- Abbreviations
- Part 1 – Hardware
- 1. Safety
- 2. Introduction
- 3. Installation
- 4. Commissioning
- 5. Functional Description
- Repeater Design
- Block Diagram
- Board and Unit Descriptions
- DC - Directional Coupler
- DPX - Duplex Filter
- LNA - Low Noise Amplifier
- CHA - Channel Amplifier Board for Channel Selective Operation
- CSA and PA Boards for Channel Selective CDMA Operation
- BSA and PA Boards for Band Selective Operation
- DIA Board
- CU Control Unit Board
- Repeater CU Software and Hardware Compatibility
- Cabling
- Part 2 – Software
- 6. OMT32 Installation
- 7. Help
- 8. Getting Started
- 9. OMT32 Features
- 10. Repeater Operations
- 11. Alarms and Events
- 12. Troubleshooting
- 13. Optional
- Appendix A - Menu Reference Guide
- Index
- Questionnaire
A
ppendix A - Menu Reference Guide
In this Appendix you will find descriptions of the main window button bar
and the main window menu.
Main Window Button Bar
Main window button functions:
Local connection - see the Access menu on page A-3.
Remote connection - see the Access menu on page A-3.
Logoff - see the Access menu on page A-3.
Exit OMT32 - see the File menu on page A-2.
Configuration - see the Operations menu on page A-7.
Status - see the Operations menu on page A-7.
Testpoints - see the Operations menu on page A-7.
Toggling active repeater part - see the Operations menu on page A-7.
Received repeater alarms - see the Operations menu on page A-8.
Repeater event log - see the Operations menu on page A-8.
Alarm reset - see the Operations menu on page A-8.
About OMT32 - see the Help menu on page A-12.
ALLGON System AB AR Repeaters & OMT32 Appendix A - Menu Reference Guide
User’s Manual VD202 90/EN Rev. 1A 1999-07 A - 1