User's Manual

Network Settings
The R2R settings can be shown in an information box.
To view the network information box, select the Repeater Network
option in the Advanced menu, and then the Network option.
The following information box is shown:
In addition to the physical and logical IDs, this box shows:
NwID Network ID, selected at the node configuration.
Active ’Yes’ means that the repeater is in operation.
PCS ’Yes’ means that the repeater is currently the master and handles
the alarm communication.
CS ’Yes’ means that the repeater is set as Control Station and can
thus be the master.
No modification can be made in this box.
Figure 13-7. R2R network settings
ALLGON System AB AR Repeaters & OMT32 Optional
User’s Manual VD202 90/EN Rev. 1A 1999-07 13 - 11