User's Manual

RCU for Wireless Connection
The RCU base unit for Wireless Connection is mounted inside the
repeater cabinet, in front of the PSU (see Figure 13-3).
The bracket for the mobile phone is mounted in the upper right corner of
the cabinet. The mobile phone is placed in the phone holder.
The RCU is connected to the P27 and P32 ports as described in the
Connection section in Chapter 3.
The mobile phone antenna is connected to the MS -20dB port on the BS
directional coupler (DC) located to the right in the cabinet.
The mobile battery charger is connected to the mobile phone.
12volt 0.7Ah
MS
DPX
ANT
TEST
DC
-30 dB
-20 dB
MS
DPX
ANT
TEST
DC
-30 dB
-20 dB
OUT
LOW
IN ATT +7V OUT1 OUT2
LNA
UL
OUT
LOW
IN+7V ATTOUT1 OUT2
LNA
DL
Figure 13-3. RCU - Wireless PCMCIA type
ALLGON System AB AR Repeaters & OMT32 Optional
User’s Manual VD202 90/EN Rev. 1A 1999-07 13 - 6