User's Manual

Repeater Date and Time
This feature is used to check or set the system real time clock in the
repeater (on the CU board). The clock is used for date and time on
alarms, etc.
To open the date and time dialog box, select the Date and Time option
in the Repeater Preferences menu.
Set time and date by clicking the up arrows or down arrows in the dialog
box.
You can set the current date and time from the OMT32/PC clock by
clicking the PC Clock button.
Click the Update button to download the settings to the repeater.
Figure 10-37. Date and time setting
ALLGON System AB AR Repeaters & OMT32 Software – Repeater Operations
User’s Manual VD202 90/EN Rev. 1A 1999-07 10 - 53