User's Manual

Callback Phone Numbers
The repeater callback phone number list contains those phone numbers
which are to be used by the repeater when Callback required is selected in
the Password Configuration dialog box (page 10-46).
The repeater callback phone number list is opened by selecting the
Callback Numbers option in the Access menu.
Phone numbers for callback passwords must be included in this list.
Maximum 25 phone numbers can be included.
The phone numbers in this list must correspond, character by character, to
the phone numbers in the ’Remote Connection Parameters’ list in OMT32
(see the ’Remote Connection’ section in Chapter 9).
This is applicable to spaces as well. To be sure, type only numerals with
no spaces or other characters. If the phone numbers do not correspond,
character by character, then the repeater will not be able to call back.
And, you will not be able to log on remotely and correct the number.
The following buttons are available if you are currently logged on with
privileges to change the callback numbers.
New
Click this button to add a new phone number to the list.
Edit
Highlighted phone number can be edited after clicking this button.
Delete
Highlighted phone number is deleted by clicking this button and
confirming the deletion.
Update
Click the Update button to download the callback numbers to the
repeater.
Figure 10-33. Repeater callback phone numbers
ALLGON System AB AR Repeaters & OMT32 Software – Repeater Operations
User’s Manual VD202 90/EN Rev. 1A 1999-07 10 - 48