User's Manual

Password required
Click this box to activate the password. Otherwise, it will not be in force.
Password
Type your password in this field. You can use from 1 up to 10 characters.
Asterisks are shown when typing the password.
A grey box means that you have no authority to change, i.e. you have
logged on OMT32 using a lower password level.
Callback required
Check this box to select callback, i.e. the repeater must call you back prior
to logging on if you are remotely connected to the repeater.
Your phone number must be included in the ’Repeater Callback Numbers’
list stored in the repeater, and in the ’Remote Connection Parameters’ list
stored in OMT32. Otherwise, the repeater will not be able to call you back.
Edit callback numbers
You can open the repeater callback phone number list either by clicking
this button or by opening it from the Access menu (see page 10-48).
Update
Click the Update button to enter the password.
Verify the new password by re-writing it in the following box:
A grey box means that the password is not changed
Click Ok when ready.
The new password is now in force.
Figure 10-32. Password verification
ALLGON System AB AR Repeaters & OMT32 Software – Repeater Operations
User’s Manual VD202 90/EN Rev. 1A 1999-07 10 - 47