User's Manual

Repeater Software Configuration
The purpose of this feature is to show the CU board software and
hardware part numbers and revision status, and to give opportunity to
download new CU software from OMT32, either locally or remotely via
modem.
Do not update or reboot the CU software unless you are authorized and
trained to download software to repeaters.
CU Revision Manager
Open the CU Revision Manager dialog box by first selecting the
Revision Manager option in the Repeater Preferences menu and
then the CU Maintenance option.
The CU Revision Manager window shows part numbers and revision
status for the current application, application 1, application 2, and the
hardware.
Figure 10-23. CU Revision Manager
ALLGON System AB AR Repeaters & OMT32 Software – Repeater Operations
User’s Manual VD202 90/EN Rev. 1A 1999-07 10 - 40