User's Manual

Repeater Boards (CHA/BSA/CSA/PA/RIA)
This feature shows the software and hardware version, the serial number
and the manufacturing data for the repeater amplifier boards CHA, BSA,
CSA and PA. Information for the R2R, Repeater to Repeater Link board,
RIA, can also be shown.
Open the board selection dialog box by selecting the Revision Manager
option in the Repeater Preferences menu and then the Subunits
option.
Select board by clicking the corresponding button.
The following two examples show software and hardware information for
a CHA amplifier board and a BSA amplifier board.
By clicking the RIA button, board information for the R2R, Repeater to
Repeater Link board is shown, see Figure 10-22.
Figure 10-19. Repeater boards
Figure 10-20. CHA board
information
Figure 10-21. BSA board
information
ALLGON System AB AR Repeaters & OMT32 Software – Repeater Operations
User’s Manual VD202 90/EN Rev. 1A 1999-07 10 - 38