User's Manual

RSSI limit downlink
Equal to the RSSI limit uplink but for the downlink path.
Traffic supervision
This feature generates an alarm if there is no traffic in any of the
channels for a certain period.
In this field, you can set the length of this period in hours.
Setting range: 1 - 168 hours.
Traffic supervision is on when the check box is checked.
BCCH supervision
This feature generates an alarm if the repeater cannot find a broadcast
control channel for a certain period.
In this field, you can set the length of this period (in hours).
Setting range: 1 - 168 hours.
BCCH supervision is on when the check box is checked.
Status Statistics
Shows whether the statistics feature is on or off, current use, and active
channels.
The second line shows if the repeater has found a BCCH and, in that
case, in which channel it is found.
Database
Shows the last statistics reading, which is done every 15th minute.
The second line shows the percentage of relevant statistics in the
database. E.g. if the repeater has been off half of the time, this line will
display 50%.
Alarms
Shows Low Traffic and BCCH lost status.
ON = Alarms have been generated.
OFF = No alarm has been generated.
ALLGON System AB AR Repeaters & OMT32 Software – Repeater Operations
User’s Manual VD202 90/EN Rev. 1A 1999-07 10 - 37