User's Manual

Traffic Statistics
The purpose of the statistics feature is to be able to set the RSSI
threshold for uplink and downlink signaling, which is used as criteria for
the statistics calculation in the repeater. The statistics can be shown by
using the OMS (see the Advanced Repeater OMS, User’s Manual).
In addition, alarms for no traffic and no broadcast channel can be set in
the statistics feature.
The statistics feature can be used for channel selective GSM traffic only.
Open the statistics window by selecting the Statistics option in the
Operations menu.
Field description:
Configuration Statistics
The statistics function is on when this box is checked.
RSSI limit uplink
Sets the input signal strength (RSSI) threshold level for active uplink
input time slots. The figure shows four active uplink time slots.
Further information about the time slot threshold level is found at the
Active time slots field for channel selective GSM status (page 10-14).
Setting range: –100dBm to –40dBm.
Figure 10-18. Traffic statistics
18
RSSI limit
uplink
ALLGON System AB AR Repeaters & OMT32 Software – Repeater Operations
User’s Manual VD202 90/EN Rev. 1A 1999-07 10 - 36