User's Manual

Cellular Testpoints (where
supported)
Error (CMEE)
Error codes read from a cellular modem.
Error (CEER)
Error codes read from a cellular modem.
Registration status
Network registration.
PIN status
PIN code status, if used.
Current operator
MCC (country code) and MNC (network code) for the current network.
COPS mode
Shows whether an automatic or manual operator is selected.
RSSI
Received signal strength to the mobile phone.
Quality (Q1)
Shows a measured ETSI quality value. If there is no relevant quality
value measured, then ’99’ is shown.
Bit errors (E1)
Shows a received ETSI bit error rate. If there is no relevant bit error
value, then ’99’ is shown.
ALLGON System AB AR Repeaters & OMT32 Software – Repeater Operations
User’s Manual VD202 90/EN Rev. 1A 1999-07 10 - 35