User's Manual

Testpoints
In the testpoints window you can read testpoint values essential for the
operation.
The testpoint window is opened by clicking the testpoint button or by
first selecting the Testpoints option in the Operations menu and then
the Boards (CHA/BSA/CSA/PA) option, the CU Board option, or the
Modem option depending on which testpoints you want to examine.
If you are connected to a combined channel/band selective repeater, then
you can swap between channel selective active part and band selective
active part (described on page 10-3).
Testpoint descriptions
Testpoint descriptions for the various repeater types are found on the
following pages:
Channel selective CHA boards for GSM ....................................... page 10-26
Channel selective CSA/PA boards for CDMA ........................................ 10-28
Band selective BSA/PA boards ................................................................ 10-30
CU board ................................................................................................... 10-32
Repeater modem ....................................................................................... 10-34
ALLGON System AB AR Repeaters & OMT32 Software – Repeater Operations
User’s Manual VD202 90/EN Rev. 1A 1999-07 10 - 25