User's Manual

Operational Status
Operational status shows mainly values set and values measured in the
repeater.
The status window is opened by clicking the status button or by selecting
the Read Status option in the Operations menu.
If you are connected to a combined channel/band selective repeater, then
you can swap between channel selective active part and band selective
active part (described on page 10-3).
You can only read from the status windows (no changes can be done).
Operational status descriptions
Operational status descriptions for the various repeater types are found
on the following pages:
Channel selective GSM repeater .................................................... page 10-14
Channel selective CDMA repeater .......................................................... 10-20
Band selective repeater ............................................................................ 10-23
ALLGON System AB AR Repeaters & OMT32 Software – Repeater Operations
User’s Manual VD202 90/EN Rev. 1A 1999-07 10 - 13