User's Manual

Channel Selective CDMA Repeater
The upper part of the configuration window contains settings that affects
all the channels. This includes combiner attenuation, max. power and
input attenuation. The lower CDMA Channels part contains individual
channel settings.
Field description:
Combiner attenuation
Attenuation in the uplink (BS) and downlink (MS) combiners. The
following value should be used:
0dB for 2 channels, CDMA operation only.
Input attenuation
To be able to decrease very high antenna input signal strength, uplink
and downlink signal inputs can be 6dB attenuated.
Click and select 0dB or 6dB attenuation.
Input attenuation is implemented on repeaters running the R1B version or
higher of the CU software.
Max output power
Sets the maximum output power for uplink and downlink signaling.
Figure 10-4. Channel selective CDMA configuration
ALLGON System AB AR Repeaters & OMT32 Software – Repeater Operations
User’s Manual VD202 90/EN Rev. 1A 1999-07 10 - 8