User Manual

e5ndteIe~tiVf~
repeftter
~‘
Figure 5-20. Band selective configuration
The left-hand part of the configuration window contains downlink
information (BSA board #1 and PA board #1 located to the left in the
cabinet or cover).
The right-hand part of the configuration window contains uplink information
(BSA board #2 and PA board #2 located to the right in the cabinet or cover).
The downmost line indicates current band width and the band width status
(fixed or adjustable).
Fixed band width operation
For repeaters equipped
with
fixed band
width
BSA boards, the following
three fields are changeable:
Downlink: Gain
Uplink: Set low band edge Gain
The values in the remaining fields are automatically calculated from the
band width and the uplink/downlink frequency difference.
Adjustable band width operation
For repeaters equipped
with
adjustable band width BSA boards, the
uplink
‘Set high band edge’ field is also available and changeable.
Users Manual VD2O1 1 7/EN
Rev. 4B 1998-03
5
-
39
PC Controlling AR Repeaters & OMT ALLGON
System AB
Field descriptions:
Bandselective repeater