User's Manual
Table Of Contents
- Front Page
- Preface
- Contents
- Figures
- Abbreviations
- 1. Safety
- 2. Introduction
- 3. Installation
- 4. Commissioning
- 5. Functional Description and Design
- 6. Optionals
- 7. Repeater Alarms
- Index
- Questionnaire
Indicators
Figure 4-1 shows the repeater indicators . There are also two external
indicators on the repeater front cover.
Repeater to Repeater Link
indicators
The two upper indicators, R2R and DATA, indicates the following R2R
status:
R2R
Green LED that indicates, with a flashing light, that the repeater
currently is a R2R Control Station. A steady light indicates that the
repeater is not currently a Control Station, or there is no more repeater
in the net. Only one repeater in an R2R net can show a flashing green
LED at the same time.
DATA
Blue LED that indicates data transmission in the net.
ANT
HI LO
ANT
LO
HI
PWR
BOOT
FAULT OPERR2R DATA
Figure 4-1. Indicators in the cabinet
ALLGON Systems AB ALR Compact Repeater Commissioning
VD203 67/EN - User’s Manual Rev. 1A 2000-07 4 - 3